Header Ads

HEX RC Multi-Axis Robotic Controller from Aerotech, Inc.



Aerotech, Inc. (USA) – Aerotech’s HEX RC is a 6-axis motion controller ideal for controlling robotic systems like hexapods. The HEX RC is 4U rack-mountable and compatible with the Automation 3200 (A3200) motion platform.

Features:
  • 4U high, rack-mount, six-axis controller for brush, brushless, and stepper motors
  • Ideal for controlling six-axis robotic systems like hexapods
  • Real-time A3200 distributed control architecture allows synchronized motion on up to 32 axes
  • FireWire® or ASCII command interface via TCP/IP
  • Program in native RS-274 G-code, AeroBasic command set, C, C++/CLI, .NET, MATLAB®, or LabVIEW® for the ultimate in programming flexibility

A high-performance processor provides the intense computing power needed to run up to 32 axes, perform complex, synchronized motion trajectories, manipulate I/O, and collect data at high speeds.

Powerful Control Architecture:
The HEX RC features 6-axes of drives capable of controlling any combination of brush, brushless, or stepper motors. It digitally performs both current loop and servo loop closures to ensure the highest level of positioning accuracy and performance. The HEX RC connects and controls up to 26 additional axes of servo, stepper, or piezo-driven stages using the A3200 distributed control architecture.

Interface and Design Options:
The HEX RC is designed with an ASCII command interface over TCP/IP for control in applications such as beamlines. Alternatively, it can act as a master controller to control other A3200 external drives via the FireWire® interface.

The HEX RC accepts amplified-sine or digital encoders. Optional integrated encoder multipliers, up to X4096, ensure high-resolution positioning.

An optional 6-axis jog pendant permits easy, manual control of the positioning system. In safety critical applications, an emergency stop option with redundant safety relays can be added.

Flexible Programming Environment:
Aerotech’s A3200 focuses on ease of use for the programmer, shortens development time compared with other tools, and provides the flexibility to use the tools or controller most familiar to programmers. A complete Integrated Development Environment and a comprehensive .NET motion library provide classes for motion, I/O, status, and diagnostic information. You can program 1 / 2 in Visual Studio and use the .NET library, or use the Motion Composer (IDE) to develop code with AeroBasicTM commands or G code. A LabVIEW® VI library is available for NI users, while a complete C library is available for those using Visual Basic, C++, or C.

For more information about the New HEX RC Multi-Axis Robotic Controller from Aerotech, Inc. click here.


Source Link

Other Articles from Aerotech, Inc. (USA)

© Aerotech, Inc. (USA) / Automation Inside
Powered by Blogger.