NEXCOM SRB 200/201 Smart Robot Gateway

NEXCOM SRB (Smart Robot Box) is a series of robot gateways to connect major industrial robots. Through Modbus,TCP/IP,OPC, and MQTT protocols, users can easily integrate robot information to HMI, SCADA or cloud to implement M2M (machine-to-machine)/M2C (machine-to-cloud) communication. Moreover, SRB series leverages Intel’s Movidius™ Myriad™ X VPUs to be able run AI programs. Traditional robots can be fully upgraded with smart AI applications such as vision inspection and predictive maintenance.

• Robot connectivity: YASKAWA, KUKA, ABB, FANUC, TM, UR
• R2M communication: Modbus TCP, TCP/IP
• R2C communication: OPC UA, MQTT
• Supports ROS applications
• Supports Intel OpenVINO Toolkit
• Supports AI inference with Intel Movidius X VPUs

SRB 200 equipped with dual Intel® Movidius™ Myriad X VPU (i5-6500 CPU, 8GB DDR4 SO-DIMM, 128GB SSD)

SRB 201 equipped with eight Intel® Movidius™ Myriad X VPU (i7-6700 CPU, 16GB DDR4 SO-DIMM, 256GB SSD)

Read More

Zemic Top-Sensors T2-8 Multi Channel Weight Transmitter with Individual Setpoints

Top-Sensors T2 - 8 channel

Recently Zemic has introduced the Top-Sensors T2-8 multi channel transmitter. They were enthusiastically received; there was a lot of interest in these new products. The main advantage are the individual setpoints per channel.

Weight transmitters are used in production areas which can be found mainly in the process industry. These weight devices with indication display are connected with PLC's, other transmitters or indicators. The Top-Sensors weight transmitters offered by Zemic Europe are suitable to connect directly 1, 4 or even 8 loadcells directly to the device. A weight transmitter provides excitation voltage which is needed for a loadcell or load cells (the input). Weight transmitters convert the weight signal (in general 2 or 3 mV/V at full scale) into a 4-20mA output, 0-10V output, 0-5V output or communicate by fieldbusses like Profinet, Profibus, CanOpen, Devicenet, Ethernet.

• Weight transmitter and indicator for Omega/Din rail mounting, suitable for back panel or junction box.
• Backlit graphic LCD display, transmissive STN, white on blue.
• 8 independent channels with  individual setpoints per loadcell
• Five key keyboard
• TEST key for direct access to the diagnostic functions.
• On board terminals for 1 to 8, 6 wire load cells, in parallel.

Read More