A&D Company, Limited (Japan) - Multiple balances and scales can be connected to a PLC, HMI and PCTwo selectable communication protocols (Modbus-RTU, Command mode). Up to a maximum of 31 sets can be connected to a PLC or PCDin rail mounting type.

Features:

• Multiple balances and scales can be connected to a PLC, HMI and PC
• Two selectable communication protocols (Modbus-RTU, Command mode)
• Up to a maximum of 31 sets can be connected to a PLC or PC
• Din rail mounting type

Specifications:

• Power supply voltage: DC 12 to 24 V + 10 % - 15 %
• Power consumption: 2 W Max.
• Interface: RS-485 ×1 (for connecting to control equipment), RS-232C ×1 (for connecting to weighing devices)
• Operating conditions: -10ºC to +50ºC Max 85 %RH (no condensation)
• External dimensions: 35.3 (W)×110.0 (H)×101.3 (D) mm
• Accessory: RS-485 connector (power clamp wire mount socket )
• Mass: Approximately 170 g